Ceramic circuit board
Free consultation hotline

13925432838
13380289778

Address:

Building 1, Qingtang Avenue, Xinnong community, Danzao Town, Foshan City, Guangdong Province, China

Zip:528226


Company Name:Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Operational Address:Liu Yingxiang Workshop II, Xinnongqingtang Development Zone, Danzao Town, Foshan, Guangdong, China


Ceramic circuit board
Your current location is:Home> Product> Ceramic circuit board
< >

Low-Temperature Co-fired Ceramic pcb (LTCC)


product type:Ceramic circuit board
Specifications：
contact number: +86 13925432838
contact email: qq347972560@outlook.com
Online message
  • Introduction

Low-Temperature Co-fired Ceramic (LTCC) is a type of ceramic material that is used in the manufacturing of electronic components. LTCC materials are made by mixing ceramic powders with organic binders and solvents, which are then formed into green sheets using a casting or tape-casting process. The green sheets are then stacked and laminated together to form a multilayer structure, which is then fired at a low temperature (usually between 800°C and 1000°C) to remove the organic binders and sinter the ceramic particles together.


The resulting LTCC material has a number of properties that make it ideal for use in electronic components. It has excellent electrical insulation properties, good thermal conductivity, and high mechanical strength. LTCC materials can be used to create a wide range of electronic components, including capacitors, inductors, resistors, and filters. They are often used in applications where size and weight are important factors, such as in mobile devices and portable electronics.

643fb849cdff5.jpg

Recommend

<

  • The damper position transducer uses the thick-film circuit pcb-13072A079

  • The Damper Position Transducer uses the Thick-film Circuit pcb-15189A

  • Thick film resistors PCB Ceramic circuit board-13042A190

  • The Damper Position Transducer uses the Thick-film Circuit pcb-12007A056-15

  • The damper position transducer uses the thick-film circuit pcb-12003A003-1

  • The damper position transducer uses the thick-film circuit Ceramic board-14129C

  • The damper position transducer uses the thick-film circuit pcb-13098A196

  • the damper position transducer uses the thick-film circuit-18337A

  • Thick film network resistor Alumina ceramic pcb circuit boards-16214C

  • Thick film resistors PCB ceramic circuit board-12005A

  • the damper position transducer uses the thick-film circuit-14129B

  • The damper position transducer uses the Thick-film Circuit pcb-12015A032

  • Thick film resistor ceramic circuit board-16254B

  • The damper position transducer uses the Thick-film Circuit pcb-12003A003

  • throttle position sensor resistor PCB-17262A

>
【return】
Previous: High-Temperature Co-fired Ceramic pcb (HTCC)    next: Direct Bonded Copper pcb (DBC)
Houbo PCB manufacturer

pcb series：Ceramic circuit board | Fuel sender PCB | Printed Resistors PCB | Throttle Position Sensor PCB

Copyright © 2018 Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Case number: Filing  Sitemap   XML  

Address:

Building 1, Qingtang Avenue, Xinnong community, Danzao Town, Foshan City, Guangdong Province, China

Zip:528226


Company Name:Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Operational Address:Liu Yingxiang Workshop II, Xinnongqingtang Development Zone, Danzao Town, Foshan, Guangdong, China