Ceramic circuit board
Free consultation hotline

13925432838
13380289778

Address:

Building 1, Qingtang Avenue, Xinnong community, Danzao Town, Foshan City, Guangdong Province, China

Zip:528226


Company Name:Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Operational Address:Liu Yingxiang Workshop II, Xinnongqingtang Development Zone, Danzao Town, Foshan, Guangdong, China


Ceramic circuit board
Your current location is:Home> Product> Ceramic circuit board
< >

Direct Bonded Copper pcb (DBC)


product type:Ceramic circuit board
Specifications：
contact number: +86 13925432838
contact email: qq347972560@outlook.com
Online message
  • Introduction

Direct Bonded Copper (DBC) is a type of substrate material used in the manufacturing of electronic components such as power modules, high-frequency amplifiers and other semiconductor devices. DBC consists of a ceramic layer (typically Al2O3 or AlN) bonded to a copper layer using a high-temperature process.


The ceramic layer provides electrical insulation and thermal conductivity, while the copper layer provides a low-resistance path for current flow and efficient heat dissipation. The bonding process creates a strong interface between the two layers, resulting in a high-performance substrate that can withstand high temperatures and thermal cycling without degrading.


DBC substrates can be customized for specific applications by varying the thickness of the ceramic and copper layers, as well as the size and placement of vias and other features. They are often used in high-power applications where efficient heat dissipation is critical, such as in automotive electronics, renewable energy systems, and industrial automation equipment.

643fb8fabfb84.jpg



Recommend

<

  • The damper position transducer uses the Thick-film circuit pcb-14112A

  • thick film resistor ceramic circuit board-14113A

  • Thick film resistors PCB Ceramic circuit board-13041A109

  • The damper position transducer uses the Thick-film circuit pcb-13033A058-3

  • The damper position transducer uses the thick-film circuit-14114A

  • HIC for functional circuit product-18341A

  • the damper position transducer uses the thick-film circuit-14141A110

  • The damper position transducer uses the Thick-film Circuit pcb-12015A032

  • The damper position transducer uses the thick-film circuit pcb-13078A087

  • Thick film network resistor Alumina ceramic pcb circuit boards-E2

  • The damper position transducer uses the Thick-film Circuit pcb-12003A003

  • The damper position transducer uses the thick-film circuit pcb-12003A003-1

  • Thick film resistors PCB ceramic circuit board-12005A

  • The damper position transducer uses the thick-film circuit pcb-13080A004

  • Low-Temperature Co-fired Ceramic pcb (LTCC)

>
【return】
Previous: Low-Temperature Co-fired Ceramic pcb (LTCC)    next: Last post
Houbo PCB manufacturer

pcb series：Ceramic circuit board | Fuel sender PCB | Printed Resistors PCB | Throttle Position Sensor PCB

Copyright © 2018 Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Case number: Filing  Sitemap   XML  

Address:

Building 1, Qingtang Avenue, Xinnong community, Danzao Town, Foshan City, Guangdong Province, China

Zip:528226


Company Name:Foshan Nanhai Houbo Electronic Technology Co., Ltd.

Operational Address:Liu Yingxiang Workshop II, Xinnongqingtang Development Zone, Danzao Town, Foshan, Guangdong, China